jozz
jozz
User name
jozz
Assigned title
Assigned post color
#88eeee
Avatar
Medals
Registration date
2009 February 26
Post count
8
Score
0 ₧
Location
Signature
Timezone
UTC
Groups
2009 Mar 18 at 08:57 UTC
error compiling in Hammer Mapping
I have changed it
but it is still the same
but it is still the same
2009 Mar 17 at 05:55 UTC
error compiling in Hammer Mapping
what is it mean??
10%...20%...30%...40%...50%...60%...70%...80%...90%... (0.44 seconds)
visibility matrix : 0.1 megs
BuildVisLeafs:
30%... (0.13 seconds)
MakeScales:
10%...20%...30%...40%...50%...60%...70%...80%...90%... (0.25 seconds)
SwapTransfers:
10%...20%...30%...40%...50%...60%...70%...80%...90%... (0.03 seconds)
Transfer Lists : 1014272 : 1.01M transfers
Indices : 7872 : 7.69k bytes
Data : 4057088 : 3.87M bytes
Bounce 1 GatherLight:
10%...20%...30%...40%...50%...60%...70%...80%...90%... (0.13 seconds)
FinalLightFace:
10%...20%...30%...40%...50%...60%...70%...80%...90%... (0.30 seconds)
1.34 seconds elapsed
----- END hlrad -----
The system cannot find the path specified.
0 file(s) copied.
The system cannot find the path specified.
Press any key to continue . . .
it comes out this
but there is no err file
10%...20%...30%...40%...50%...60%...70%...80%...90%... (0.44 seconds)
visibility matrix : 0.1 megs
BuildVisLeafs:
30%... (0.13 seconds)
MakeScales:
10%...20%...30%...40%...50%...60%...70%...80%...90%... (0.25 seconds)
SwapTransfers:
10%...20%...30%...40%...50%...60%...70%...80%...90%... (0.03 seconds)
Transfer Lists : 1014272 : 1.01M transfers
Indices : 7872 : 7.69k bytes
Data : 4057088 : 3.87M bytes
Bounce 1 GatherLight:
10%...20%...30%...40%...50%...60%...70%...80%...90%... (0.13 seconds)
FinalLightFace:
10%...20%...30%...40%...50%...60%...70%...80%...90%... (0.30 seconds)
1.34 seconds elapsed
----- END hlrad -----
The system cannot find the path specified.
0 file(s) copied.
The system cannot find the path specified.
Press any key to continue . . .
it comes out this
but there is no err file
2009 Mar 5 at 08:08 UTC
error compiling in Hammer Mapping
o yea
in the text.bat
it said copymapname.bsp "c:......
what did we write for this one
and
cd c:......
in the text.bat
it said copymapname.bsp "c:......
what did we write for this one
and
cd c:......
2009 Mar 4 at 07:50 UTC
error compiling in Hammer Mapping
which wad do you mean ?
2009 Mar 3 at 12:54 UTC
error compiling in Hammer Mapping
it said
----- BEGIN hlvis -----
Command line: hlvis tutorial_map1
>> There was a problem compiling the map.
>> Check the file tutorial_map1.log for the cause.
----- END hlvis -----
hlrad v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
----- BEGIN hlrad -----
Command line: hlrad tutorial_map1
>> There was a problem compiling the map.
>> Check the file tutorial_map1.log for the cause.
----- END hlrad -----
The system cannot find the file specified.
Press any key to continue . . .
there is the err file
it said hlcsg: Error: Could not open wad file \program files\counter-strike 1.6\cstrike\mod\cstrike.wad
hlcsg: Error: Could not find WAD file
Description: The compile tools could not locate a wad file that the map was referencing.
Howto Fix: Make sure the wad's listed in the level editor actually all exist
i don't understand
----- BEGIN hlvis -----
Command line: hlvis tutorial_map1
>> There was a problem compiling the map.
>> Check the file tutorial_map1.log for the cause.
----- END hlvis -----
hlrad v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
----- BEGIN hlrad -----
Command line: hlrad tutorial_map1
>> There was a problem compiling the map.
>> Check the file tutorial_map1.log for the cause.
----- END hlrad -----
The system cannot find the file specified.
Press any key to continue . . .
there is the err file
it said hlcsg: Error: Could not open wad file \program files\counter-strike 1.6\cstrike\mod\cstrike.wad
hlcsg: Error: Could not find WAD file
Description: The compile tools could not locate a wad file that the map was referencing.
Howto Fix: Make sure the wad's listed in the level editor actually all exist
i don't understand
2009 Mar 3 at 07:51 UTC
error compiling in Hammer Mapping
@echo off
hlcsg -nowadtextures tutorial map1
hlbsp tutorial map1
hlvis tutorial map1
hlrad tutorial map1
copy mapname.bsp "C:\Counter-Strike 1.6\cstrike\maps"
cd C:\Counter-Strike 1.6
pause
hl -dev -console -game cstrike +sv_cheats 1 +tutorial map1
hlcsg -nowadtextures tutorial map1
hlbsp tutorial map1
hlvis tutorial map1
hlrad tutorial map1
copy mapname.bsp "C:\Counter-Strike 1.6\cstrike\maps"
cd C:\Counter-Strike 1.6
pause
hl -dev -console -game cstrike +sv_cheats 1 +tutorial map1
2009 Mar 2 at 07:58 UTC
error compiling in Hammer Mapping
i have another problem. -texdata # : Alter maximum texture memory limit (in kb)
-chart : display bsp statitics
-low | -high : run program an altered priority level
-nolog : Do not generate the compile logfiles
-threads # : manually specify the number of threads to run
-estimate : display estimated time during compile
-verbose : compile with verbose messages
-noinfo : Do not show tool configuration information
-dev # : compile with developer message
-colourgamma r g b : Sets different gamma values for r, g, b
-colourscale r g b : Sets different lightscale values for r, g ,b
-colourjitter r g b : Adds noise, independent colours, for dithering
-jitter r g b : Adds noise, monochromatic, for dithering
-nodiffuse : Disables light_environment diffuse hack
-nospotpoints : Disables light_spot spherical point sources
-softlight r g b d : Scaling values for backwards-light hack
-customshadowwithbounce : Enables custom shadows with bounce light
-rgbtransfers : Enables RGB Transfers (for custom shadows)
mapfile : The mapfile to compile
The system cannot find the file specified.
Press any key to continue . . .
is there anything wrong??
ican't find any mapname.err
but when i try to play but nothing happened again
-chart : display bsp statitics
-low | -high : run program an altered priority level
-nolog : Do not generate the compile logfiles
-threads # : manually specify the number of threads to run
-estimate : display estimated time during compile
-verbose : compile with verbose messages
-noinfo : Do not show tool configuration information
-dev # : compile with developer message
-colourgamma r g b : Sets different gamma values for r, g, b
-colourscale r g b : Sets different lightscale values for r, g ,b
-colourjitter r g b : Adds noise, independent colours, for dithering
-jitter r g b : Adds noise, monochromatic, for dithering
-nodiffuse : Disables light_environment diffuse hack
-nospotpoints : Disables light_spot spherical point sources
-softlight r g b d : Scaling values for backwards-light hack
-customshadowwithbounce : Enables custom shadows with bounce light
-rgbtransfers : Enables RGB Transfers (for custom shadows)
mapfile : The mapfile to compile
The system cannot find the file specified.
Press any key to continue . . .
is there anything wrong??
ican't find any mapname.err
but when i try to play but nothing happened again
2009 Mar 1 at 13:49 UTC
error compiling in Hammer Mapping
i'm newbie to make a map
i have a problem in compile problem
i used this link to help me
http://www.superjer.com/learn7.php
i've followed the instruction and the problem is
When you're sure you have it right, save the file and close Notepad. Then double click on the file 'mapname.bat' to run it. Lot's of confusing stuff will show up in a command window as ZHLT compiles your map. When it is done you will see (at the bottom):
but my computer doesn't respond anything
it was just a note. nothing happened
can anyone help??
i have a problem in compile problem
i used this link to help me
http://www.superjer.com/learn7.php
i've followed the instruction and the problem is
When you're sure you have it right, save the file and close Notepad. Then double click on the file 'mapname.bat' to run it. Lot's of confusing stuff will show up in a command window as ZHLT compiles your map. When it is done you will see (at the bottom):
but my computer doesn't respond anything
it was just a note. nothing happened
can anyone help??