Search
Search
Posts written by Denis93:
Truck
User
I have 3gb ddr3 of ram, that cannot be.
I still have 40GB left.
I compile with the bat.
-Dunno what is swap file
I defragmented
I couldn't have viruses on both pc's ;))
-Dunno what this could be:
* on at least one occasion this was caused by a corrupt prefab.
-Dunno what this could be:
* on at least one occasion this was solved by removing a skybox and so making the level smaller.
I still have 40GB left.
I compile with the bat.
-Dunno what is swap file
I defragmented
I couldn't have viruses on both pc's ;))
-Dunno what this could be:
* on at least one occasion this was caused by a corrupt prefab.
-Dunno what this could be:
* on at least one occasion this was solved by removing a skybox and so making the level smaller.
Truck
User
map.err said:
hlrad: Error: Memory allocation failure
Description: The program failled to allocate a block of memory.
Howto Fix: Likely causes are (in order of likeliness) : the partition holding the swapfile is full; swapfile size is smaller than required; memory fragmentation; heap corruption
hlrad: Error: Memory allocation failure
Description: The program failled to allocate a block of memory.
Howto Fix: Likely causes are (in order of likeliness) : the partition holding the swapfile is full; swapfile size is smaller than required; memory fragmentation; heap corruption
hlrad: Error: Memory allocation failure
Description: The program failled to allocate a block of memory.
Howto Fix: Likely causes are (in order of likeliness) : the partition holding the swapfile is full; swapfile size is smaller than required; memory fragmentation; heap corruption
hlrad: Error: Memory allocation failure
Description: The program failled to allocate a block of memory.
Howto Fix: Likely causes are (in order of likeliness) : the partition holding the swapfile is full; swapfile size is smaller than required; memory fragmentation; heap corruption
Description: The program failled to allocate a block of memory.
Howto Fix: Likely causes are (in order of likeliness) : the partition holding the swapfile is full; swapfile size is smaller than required; memory fragmentation; heap corruption
hlrad: Error: Memory allocation failure
Description: The program failled to allocate a block of memory.
Howto Fix: Likely causes are (in order of likeliness) : the partition holding the swapfile is full; swapfile size is smaller than required; memory fragmentation; heap corruption
hlrad: Error: Memory allocation failure
Description: The program failled to allocate a block of memory.
Howto Fix: Likely causes are (in order of likeliness) : the partition holding the swapfile is full; swapfile size is smaller than required; memory fragmentation; heap corruption
hlrad: Error: Memory allocation failure
Description: The program failled to allocate a block of memory.
Howto Fix: Likely causes are (in order of likeliness) : the partition holding the swapfile is full; swapfile size is smaller than required; memory fragmentation; heap corruption
I've tried on my pc , I've tried on my laptop and it gives me this error. I have a lot of space so that cannot be , I defragmented the partition , and that's all that I did. Dunno what to do :(
Help! :(
Truck
User
What tga files?
In the wad files that I extracted with textract don't work :(
In the wad files that I extracted with textract don't work :(
Truck
User
No one? :(
Truck
User
I thought everybody knew that map :)
It's a continuous exterior("sky")
Just google fy_dinoiceworld and you will find where to download it from coes it's a popular map :D
Dunno from wich angle to get it :(
http://img3.imageshack.us/i/10501375.png/
It's a continuous exterior("sky")
Just google fy_dinoiceworld and you will find where to download it from coes it's a popular map :D
Dunno from wich angle to get it :(
http://img3.imageshack.us/i/10501375.png/
Truck
User
I just made it on my laptop :D Where I have to say that I have ATI too :P
Truck
User
hy there, does anybody know how I can make a fy_dinoiceworld tyope of "sky" ? And dows anybody know where I can find such a texture? :D
Truck
User
Solved it on my laptop :) Thx for the help! :)
Truck
User
Ohh I installed that already, eh.. maybe a friend will let me try it on his pc -.-
Truck
User
Let's just leave the graphic card to the side...
The thing is (as I told above) I had no problem in the past texturing on aly one face... do you know what could I have done? Should I download hammer again(bacause I have it in my pc for quite a lot of time).?
The thing is (as I told above) I had no problem in the past texturing on aly one face... do you know what could I have done? Should I download hammer again(bacause I have it in my pc for quite a lot of time).?
Truck
User
Truck
User
@superjer : no , that's my graphic card... I just wanted to know what do you thought aboutit because many sayd that it's outdated...
And before it worked just fine(with the one face texturing)
And before it worked just fine(with the one face texturing)
Truck
User
My video card : ATI Radeon X300/X500/X1050 Series
Well? :|
Well? :|
Truck
User
desn't work :(
Truck
User
well it's old.. but it worked just fine before...
here you are ,the face where I need to put the texture and a face where I put it(a few years ago).
http://img814.imageshack.us/img814/2305/notthatold.png
here you are ,the face where I need to put the texture and a face where I put it(a few years ago).
http://img814.imageshack.us/img814/2305/notthatold.png
Truck
User
I just sayd in my previous post that I updated them :P
Doesn't anyone have a Yahoo Messenger/MSN ID, so that I give them Team Viewer details to get in my pc and see what's wrong? It goes a lot faster :D
Doesn't anyone have a Yahoo Messenger/MSN ID, so that I give them Team Viewer details to get in my pc and see what's wrong? It goes a lot faster :D
Truck
User
Hide mask not on , I MOST DEFINETLY pressed on Toggle texture aplication .
I hope you didn't understand wrong, I can select entire block if I click it in the 2d view cameras , in the 3d textured camera, I can't click anything!
I found something here with driver update for my ATI , but no luck...
I hope you didn't understand wrong, I can select entire block if I click it in the 2d view cameras , in the 3d textured camera, I can't click anything!
I found something here with driver update for my ATI , but no luck...
Truck
User
I am trying to explain here that it doesn't let me click one side and you still continue explaining me the same thing (that I already know by heart).
IT SIMPLY DOESN'T LET ME CLICK ON IT!
Maybe you know what I could have done to make it not let me click it (changed some options or .. I don't know...)
It only lets me select entire object in up/front/side view...
As I remember I must click (for one side) in the camera view..
IT SIMPLY DOESN'T LET ME CLICK ON IT!
Maybe you know what I could have done to make it not let me click it (changed some options or .. I don't know...)
It only lets me select entire object in up/front/side view...
As I remember I must click (for one side) in the camera view..
Truck
User
not so helpful.
2&3 I know too , but they don't work...
And 1, huh?
2&3 I know too , but they don't work...
And 1, huh?
Truck
User
Hy there,
I'm a little bit stuck at a thing. I have a really old map that I sterted 2 years ago I think... and I want to aply textures on oly 1 face of the block. I amde it then , now.. I can't make it anymore :( How do I do it.
Oh and another thing. I am a sucki "lighter" , by that I mean I don't know how to make light look natural(I only know how to use light entity, I searched for another way to do it but no luck :( )
Thanks in advance
I'm a little bit stuck at a thing. I have a really old map that I sterted 2 years ago I think... and I want to aply textures on oly 1 face of the block. I amde it then , now.. I can't make it anymore :( How do I do it.
Oh and another thing. I am a sucki "lighter" , by that I mean I don't know how to make light look natural(I only know how to use light entity, I searched for another way to do it but no luck :( )
Thanks in advance